TalkSwitch 488vs IP PBX

Price:

$1,515.25

SKU:

CT.TS001.148801

Brand:

TalkSwitch

Weight:

1.00 LBS

Availability:

Usually ships in 2-5 days

Shipping:

Calculated at checkout

Product Description

TalkSwitch 488vs IP PBX Technical Specifications
(North American models)

System
Analog trunks	4
VoIP trunks	8
Analog extension interfaces	8
Extension capacity	16: 8 analog or IP, 8 pure IP
LAN interface	1
USB interface	1
Memory	2 hours
Memory expansion	1, 2, 4.5 and 9 hour memory cards
Music input	Phono jack (1/8" mono) or stored .wav file
PA output	Phono jack (1/8" mono) or stored .wav file
Power source	120 VAC, 60 Hz — In / 16 VAC, 2.0 A — Out
Power-failure line to extension jacks	Extension 4 connects to Line 1
Analog extension interface
Trunk type	Loop start
Connector type	RJ-11, 2-pin
Interface impedance	600 ohms
Loop range	0–600 ohms
Hook flash supported	Yes
On-hook voltage	35 volts
Off-hook loop voltage source	35 volts
Off-hook loop current	23 mA to 40 mA
Dial tone level	-2.4 dBm
Ringing voltage	90 volts RMS
Ringing frequency	20 Hz – true sine wave
Total ringing load	5 REN
Analog trunks
Connector type	RJ-11, 2-pin
Trunk type	Loop start
Interface impedance	Configurable, 600 ohms, 600 complex, 900 ohms, 900 complex
Ringing impedance	3,900 ohms
Ringing sensitivity	45 volts RMS @ 20 Hz
REN	0.7B
Longitudinal balance	69 dB
Signal level	-10 dB
Distinctive ring supported	Yes
Caller ID support	FSK, all lines
VoIP features
• Embedded SIP server and user agents
• Integrated registrar
• Can use external SIP servers as required
• RTP
• G.711 µ-law/A-law, G.726 (32 Kbps), G.729a
• G.168 echo cancellation
• VAD, silence suppression
• Adaptive jitter buffer
• Packet loss concealment
• Fax tone detection

Dimensions (H x W x L)
Metric	51.6 mm x 203.2 mm x 213.4 mm
Imperial	2.03" x 8" x 8.4"
FEATURES VoIP and traditional telephone lines Auto Attendants Voicemail Remote Extensions External IP Extensions * Easy set-up Expandable Analog and IP phones Dial-By-Name Directory Voicemail to E-mail Music on Hold Call Cascade Ring Groups Uniform Call Distribution Call Queue Automatic Route Selection Toll Restriction Call Detail Record Logging Line Appearance (with TS-9133i and TS-480i phones) Multiple Language Prompts Call Forward Auto Fax Detection Call Conference Call Back/Call Bridge Mode Scheduling Call Hold/Transfer/Park Call Screening Intercom Call Pickup Distinctive Ring Public Announcement Remote Management LAN capability Free Software Upgrades

Requirements and recommendations:

* Requires a VoIP enabled TalkSwitch system and broadband Internet connection at both locations.

For configuration software 5.0: Windows Vista (32 bit) or Windows XP or Windows 2000 and minimum 256MB RAM, 160MB hard disk space and 800x600 screen resolution.

For configuration software 6.0: Windows Vista (32 bit): recommended 1 GHz or greater processor speed, 1 GB or greater RAM. 220 MB hard disk space and 1024x768 screen resolution.

Windows XP or Windows 2000: recommended 1 GHz or greater processor speed, 512 MB RAM. 220 MB hard disk space and 1024x768 screen resolution.

For VoIP operation: Broadband internet connection. VoIP calling to numbers outside of branch-to-branch TalkSwitch systems require subscriptions to compatible VoIP services.

Wiring: TalkSwitch usually requires no extra wiring beyond the standard infrastructure in most commercial and residential buildings. In rare cases, depending on your existing infrastructure and desired distribution of extensions, some re-wiring may be necessary. Consult your Authorized TalkSwitch Reseller or talk to a telephone systems and service professional in your area.

Telephone company services:
Some phone company services can enhance your TalkSwitch performance:
Caller ID is recommended but not required.
Hunt/Rollover/Busy Forwarding is recommended if you have more than one phone line connected to TalkSwitch.
Transfer and Clear frees a phone line after a call has been transferred to a remote extension.
3-way Calling allows you to use a single line to forward calls to remote extensions, conference calls and access call bridge. If you want the caller to hear music continuously while on hold, we do not recommend using this service.
Telephone Company Voicemail allows a caller to leave a message even if all lines become unavailable. We do not recommend using Call Waiting, because TalkSwitch can’t answer two calls on the same line. The second caller would be unable to access your auto attendants, extensions, voicemail and call cascade sequences.